Documentation
Table of Contents
22 Problems
説明
これらのパラメーターと、各ダッシュボードウィジェットフィールドオブジェクトの有効なプロパティ値を使用することで、dashboard.createメソッドおよびdashboard.updateメソッドで障害ウィジェットを設定できます。
ウィジェットのfieldsプロパティは、ダッシュボードの作成または更新時に検証されません。 これにより、ユーザーは組み込みウィジェットを変更したり、カスタムウィジェットを作成したりできますが、ウィジェットを誤って作成または更新してしまうリスクも生じます。 障害ウィジェットを正常に作成または更新するには、以下の表に記載されているパラメーターの動作を参照してください。
Parameters
The following parameters are supported for the Problems widget.
| Parameter | type | name | value | |
|---|---|---|---|---|
| Refresh interval | 0 | rf_rate | 0 - No refresh; 10 - 10 seconds; 30 - 30 seconds; 60 - (default) 1 minute; 120 - 2 minutes; 600 - 10 minutes; 900 - 15 minutes. |
|
| Show | 0 | show | 1 - (default) Recent problems; 2 - History; 3 - Problems. |
|
| Host groups | 2 | groupids.0 | Host group ID. Note: To configure multiple host groups, create a dashboard widget field object for each host group with an incremented number in the property name. This parameter is not supported if configuring the widget on a template dashboard. |
|
| Host groups (Widget) | 1 | groupids._reference | Instead of Host group ID:ABCDE._hostgroupids - set a compatible widget (with its Reference parameter set to "ABCDE") as the data source for host groups.This parameter is not supported if configuring the widget on a template dashboard. |
|
| Exclude host groups | 2 | exclude_groupids.0 | Host group ID. Note: To exclude multiple host groups, create a dashboard widget field object for each host group with an incremented number in the property name. This parameter is not supported if configuring the widget on a template dashboard. |
|
| Hosts | 3 | hostids.0 | Host ID. Note: To configure multiple hosts, create a dashboard widget field object for each host with an incremented number in the property name. For multiple hosts, the parameter Host groups must either be not configured at all or configured with at least one host group that the configured hosts belong to. This parameter is not supported if configuring the widget on a template dashboard. |
|
| Hosts (Widget/Dashboard) | 1 | hostids._reference | Instead of Host ID:DASHBOARD.hostids - set the Host selector as the data source for hosts;ABCDE._hostids - set a compatible widget (with its Reference parameter set to "ABCDE") as the data source for hosts.This parameter is not supported if configuring the widget on a template dashboard. |
|
| Problem | 1 | problem | Problem event name (case insensitive, full name or part of it). | |
| Severity | 0 | severities.0 | 0 - Not classified; 1 - Information; 2 - Warning; 3 - Average; 4 - High; 5 - Disaster. Default: empty (all enabled). Note: To configure multiple values, create a dashboard widget field object for each value with an incremented number in the property name. |
|
| Problem tags | ||||
| Evaluation type | 0 | evaltype | 0 - (default) And/Or; 2 - Or. |
|
| Tag name | 1 | tags.0.tag | Any string value. Note: The number in the property name references tag order in the tag evaluation list. Parameter behavior: - required if configuring Problem tags |
|
| Operator | 0 | tags.0.operator | 0 - Contains; 1 - Equals; 2 - Does not contain; 3 - Does not equal; 4 - Exists; 5 - Does not exist. Note: The number in the property name references tag order in the tag evaluation list. Parameter behavior: - required if configuring Problem tags |
|
| Tag value | 1 | tags.0.value | Any string value. Note: The number in the property name references tag order in the tag evaluation list. Parameter behavior: - required if configuring Problem tags |
|
| Show tags | 0 | show_tags | 0 - (default) None; 1 - 1; 2 - 2; 3 - 3. |
|
| Tag name (format) | 0 | tag_name_format | 0 - (default) Full; 1 - Shortened; 2 - None. Parameter behavior: - supported if Show tags is set to "1", "2", or "3" |
|
| Tag display priority | 1 | tag_priority | Comma-separated list of tags. Parameter behavior: - supported if Show tags is set to "1", "2", or "3" |
|
| Show operational data | 0 | show_opdata | 0 - (default) None; 1 - Separately; 2 - With problem name. |
|
| Show suppressed problems | 0 | show_suppressed | 0 - (default) Disabled; 1 - Enabled. |
|
| Acknowledgement status | 0 | acknowledgement_status | 0 - (default) all; 1 - Unacknowledged; 2 - Acknowledged. |
|
| By me | 0 | acknowledged_by_me | 0 - (default) Disabled; 1 - Enabled. |
|
| Sort entries by | 0 | sort_triggers | 1 - Severity (descending); 2 - Host (ascending); 3 - Time (ascending); 4 - (default) Time (descending); 13 - Severity (ascending); 14 - Host (descending); 15 - Problem (ascending); 16 - Problem (descending). For all values, except "Time (descending)" and "Time (ascending)", the Show timeline parameter must be set to "Disabled". Values "Host (ascending)" and "Host (descending)" are not supported if configuring the widget on a template dashboard. |
|
| Show timeline | 0 | show_timeline | 0 - Disabled; 1 - (default) Enabled. Parameter behavior: - supported if Sort entries by is set to "Time (descending)" or "Time (ascending)" |
|
| Show lines | 0 | show_lines | Possible values range from 1-100. Default: 25. |
|
| Reference | 1 | reference | Any string value consisting of 5 characters (e.g., ABCDE or JBPNL). This value must be unique within the dashboard to which the widget belongs.Parameter behavior: - required |
|
例
次の例は、障害ウィジェットのダッシュボードウィジェットフィールドオブジェクトの設定を説明することだけを目的としています。 ダッシュボードの設定の詳細については、dashboard.createを参照してください。
障害ウィジェットの設定
ホストグループ"4"で、以下の条件を満たす障害を表示する障害ウィジェットを設定します:
- "scope"という名前のタグが付いており、そのタグの値が"performance"、"availability"または"capacity"である障害。
- 深刻度が"警告"、"軽度の障害"、"重度の障害"、"致命的な障害"である障害。
さらに、タグと運用データを表示するようにウィジェットを設定します。
{
"jsonrpc": "2.0",
"method": "dashboard.create",
"params": {
"name": "My dashboard",
"display_period": 30,
"auto_start": 1,
"pages": [
{
"widgets": [
{
"type": "problems",
"name": "Problems",
"x": 0,
"y": 0,
"width": 36,
"height": 5,
"view_mode": 0,
"fields": [
{
"type": 2,
"name": "groupids.0",
"value": 4
},
{
"type": 1,
"name": "tags.0.tag",
"value": "scope"
},
{
"type": 0,
"name": "tags.0.operator",
"value": 0
},
{
"type": 1,
"name": "tags.0.value",
"value": "performance"
},
{
"type": 1,
"name": "tags.1.tag",
"value": "scope"
},
{
"type": 0,
"name": "tags.1.operator",
"value": 0
},
{
"type": 1,
"name": "tags.1.value",
"value": "availability"
},
{
"type": 1,
"name": "tags.2.tag",
"value": "scope"
},
{
"type": 0,
"name": "tags.2.operator",
"value": 0
},
{
"type": 1,
"name": "tags.2.value",
"value": "capacity"
},
{
"type": 0,
"name": "severities.0",
"value": 2
},
{
"type": 0,
"name": "severities.1",
"value": 3
},
{
"type": 0,
"name": "severities.2",
"value": 4
},
{
"type": 0,
"name": "severities.3",
"value": 5
},
{
"type": 0,
"name": "show_tags",
"value": 1
},
{
"type": 0,
"name": "show_opdata",
"value": 1
}
]
}
]
}
],
"userGroups": [
{
"usrgrpid": 7,
"permission": 2
}
],
"users": [
{
"userid": 1,
"permission": 3
}
]
},
"id": 1
}レスポンス: